LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belt >> Front Passenger Seat Belt Warning Light >> Removal

Front Passenger Seat Belt Warning Light: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE INSTRUMENT PANEL GARNISH RH  (See REMOVAL )
  3. REMOVE INSTRUMENT PANEL GARNISH LH  (See REMOVAL )
  4. REMOVE INTEGRATION CONTROL PANEL ASSEMBLY (Built-in Front Passenger Seat Belt Warning Light) 
    1. Remove the 2 screws.
    2. Disengage the 4 clips and remove the front passenger seat belt warning light.
      3. Fig 1: Identifying Screws And Clips Of Front Passenger Seat Belt Warning Light
      G05580257Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disconnect the 2 air conditioner amplifier connectors and the blower switch connector.
scientia non olet · About LEMON Manuals