LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belt >> Front Passenger Seat Belt Warning Light >> Installation

Front Passenger Seat Belt Warning Light: Installation

  1. INSTALL INTEGRATION CONTROL PANEL ASSEMBLY (Built-in Front Passenger Seat Belt Warning Light) 
    1. Connect the blower switch connector and the 2 air conditioner amplifier connectors.
    2. Engage the 4 clips and install the front passenger seat belt warning light.
      3. Fig 1: Identifying Integration Control Panel Clips And Screws
      G05113353Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Tighten the 2 screws.
  2. INSTALL INSTRUMENT PANEL GARNISH RH  (See INSTALLATION )
  3. INSTALL INSTRUMENT PANEL GARNISH LH  (See INSTALLATION )
  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf) 

scientia non olet · About LEMON Manuals