LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System >> Occupant Classification System >> How To Proceed With Troubleshooting

How To Proceed With Troubleshooting

  1. VEHICLE BROUGHT TO WORKSHOP 
  2. CUSTOMER PROBLEM ANALYSIS  (See HOW TO PROCEED WITH TROUBLESHOOTING )
  3. PASSENGER AIRBAG ON/OFF INDICATOR CHECK  (See DIAGNOSIS SYSTEM  )
  4. DTCs CHECK (Present and Past DTCs)  (See DTC CHECK/CLEAR  )
    1. Check for DTCs.

      Result 

      DTC RESULT TABLE

      Result Proceed to
      DTC is output. A
      DTC is not output. B

    B: GO TO  PROBLEM SYMPTOMS TABLE  

    A: GO TO NEXT STEP 

  5. DTCs TABLE  (See DIAGNOSTIC TROUBLE CODE TABLE  )
  6. CIRCUIT INSPECTION 
  7. REPAIR OR REPLACEMENT 
  8. DTC CLEARANCE (Present and Past DTCs)  (See DTC CHECK/CLEAR  )
    1. Clear the DTCs.
  9. DTC CHECK (Present and Past DTCs)  (See DTC CHECK/CLEAR  )
    1. Check for DTCs.

      Result 

      DTC RESULT TABLE

      Result Proceed to
      DTC is not output. A
      DTC is output. B

    B:  Go to step  5

    A: GO TO NEXT STEP 

  10. SYMPTOM SIMULATION  (See DIAGNOSIS SYSTEM  )
    1. Check the passenger airbag ON/OFF indicator condition.

      Result 

      RESULT TABLE

      Result Proceed to
      Passenger airbag ON/OFF indicator is operating normally. A
      Passenger airbag ON/OFF indicator (OFF) and SRS warning light come on. B

    B:  Go to step  5

    A: GO TO NEXT STEP 

  11. CONFIRMATION TEST 

    NEXT: END 

scientia non olet · About LEMON Manuals