Seat Heater Switch: Inspection

WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT SEAT HEATER SWITCH

Measure the resistance of the seat heater switch when the switch is operated (see Fig 1).

Standard resistance

for LH

LH SEAT HEATER SWITCH-RESISTANCE SPECIFIED CONDITION

Tester Connection	Switch Condition	Specified Condition
5 (IG) - 6 (LH)	ON	Below 1 Ω
5 (IG) - 6 (LH)	OFF	10 kΩ or higher

for RH

RH SEAT HEATER SWITCH-RESISTANCE SPECIFIED CONDITION

Tester Connection	Switch Condition	Specified Condition
4 (IG) - 3 (RH)	ON	Below 1 Ω
4 (IG) - 3 (RH)	OFF	10 kΩ or higher

Fig 1: Identifying Seat Heater Switch Connector Terminal

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If the result is not as specified, replace the switch.

Check that the seat heater switch indicator light illuminates when the switch is operated (see Fig 2).

for LH

LH SEAT HEATER SWITCH INDICATOR LIGHT-OPERATIONAL CONDITION CHART

Measurement Connection	Switch Condition	Specified Condition
Battery positive (+) --> 5 (IG) Battery negative (-) --> 2 (E)	ON	Illuminates

for RH

RH SEAT HEATER SWITCH INDICATOR LIGHT-OPERATIONAL CONDITION CHART

Measurement Connection	Switch Condition	Specified Condition
Battery positive (+) --> 4 (IG) Battery negative (-) --> 2 (E)	ON	Illuminates

Fig 2: Identifying Seat Heater Switch Indicator Lights (LH & RH) Connector Terminals

If the result is not as specified, replace the switch.

Check that the seat heater switch illuminates (see Fig 3).

SEAT HEATER SWITCH INDICATOR LIGHT-OPERATIONAL CONDITION CHART

Measurement Connection	Switch Condition	Specified Condition
Battery positive (+) --> 7 Battery negative (-) --> 8	Always	Illuminates

Fig 3: Identifying Seat Heater Switch Indicator Light Connector Terminal

If the result is not as specified, replace the switch.