Monitor Result
WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Detailed information on Checking Monitor Status (see CHECKING MONITOR STATUS ).
The test value and test limit information are described as shown in the following tables. Check the monitor result and test values after performing the monitor drive pattern (refer to Confirmation Monitor).
- Monitor Identification Data (MID) is assigned to each emission-related component.
- TID Identification (TID) is assigned to each test value.
- Scaling is used to calculate the test value indicated on generic OBD II scan tools.
Air fuel ratio sensor bank 1 sensor 1
AIR FUEL RATIO SENSOR BANK 1 SENSOR 1
| MID | TID | Scaling | Description of Test Value | Minimum Test Limit | Maximum Test Limit |
|---|---|---|---|---|---|
| $05 | $8E | Multiply by 0.0003 (No dimension) | Response rate deterioration level for A/F sensor | Malfunction criterion | FF |
Air fuel ratio sensor bank 2 sensor 1
AIR FUEL RATIO SENSOR BANK 2 SENSOR 1
| MID | TID | Scaling | Description of Test Value | Minimum Test Limit | Maximum Test Limit |
|---|---|---|---|---|---|
| $01 | $8E | Multiply by 0.0003 (No dimension) | Response rate deterioration level for A/F sensor | Malfunction criterion | FF |