LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 935 (Engine Control System - Diagnostic Codes (3 Of 3)) >> DTC P2430, P2431, P2432, P2433: Secondary Air Injection System Air Flow/Pressure Sensor Circuit Bank 1; Secondary Air Injection System Air Flow/Pressure Sensor Circuit Range/Performance Bank 1; Secondary Air Injection System Air Flow/Pressure Sensor Circuit Low Bank 1; Secondary Air Injection System Air Flow/Pressure Sensor Circuit High Bank 1 >> Description

DTC P2430, P2431, P2432, P2433: Secondary Air Injection System Air Flow/Pressure Sensor Circuit Bank 1; Secondary Air Injection System Air Flow/Pressure Sensor Circuit Range/Performance Bank 1; Secondary Air Injection System Air Flow/Pressure Sensor Circuit Low Bank 1; Secondary Air Injection System Air Flow/Pressure Sensor Circuit High Bank 1: Description

WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
SECONDARY AIR INJECTION SYSTEM AIR FLOW/PRESSURE SENSOR

DTC No. DTC Detection Condition Trouble Area
P2430 While the engine is running, if voltage output of the pressure sensor indicates 0.1 V or less, or indicates 4.8 V or more. (1 trip detection logic)
  • Pressure sensor
  • Open or short in pressure sensor circuit
  • ECM
P2431 The pressure sensor indicates less than 45 kPa (338 mHg), or more than 135 kPa (1013 mHg). (1 trip detection logic)
  • Pressure sensor
  • Open or short in pressure sensor circuit
  • ECM
P2432 While the engine is running, if voltage output of pressure sensor remains below 0.1 V. (1 trip detection logic)
  • Pressure sensor
  • Open or short in pressure sensor circuit
  • ECM
P2433 While the engine is running, if voltage output of the pressure sensor remains above 4.8 V. (1 trip detection logic)
  • Pressure sensor
  • Open or short in pressure sensor circuit
  • ECM