LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 935 (Engine Control System - Diagnostic Codes (3 Of 3)) >> DTC P2419, P2420: Evaporative Emission Pressure Switching Valve Stuck ON; Evaporative Emission Pressure Switching Valve Stuck OFF >> Typical Malfunction Thresholds

Typical Malfunction Thresholds

WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. P2419: Vent valve stuck closed

    "Saturated" indicates that the EVAP pressure change is less than 0.1 kPa (0.75 mmHg) in 30 seconds.

    TYPICAL MALFUNCTION THRESHOLDS TABLE

    One of following conditions met -
    FTP when just after reference pressure measurement began -1 kPa (755 mmHg) or higher
    Reference pressure Less than -4.85 kPa (726 mmHg)
    Reference pressure -1.05 kPa (754 mmHg) or higher
    Reference pressure Not saturated within 60 seconds
    Reference pressure difference between first and second 0.7 kPa (5.25 mmHg) or more
  2. P2420: Vent valve stuck open (vent)
    TYPICAL MALFUNCTION THRESHOLDS TABLE

    EVAP pressure change after EVAP canister vent valve is ON Less than 0.3 kPa (2.25 mmHg)