LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 935 (Engine Control System - Diagnostic Codes (3 Of 3)) >> DTC P2119: Throttle Actuator Control Throttle Body Range/Performance >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL ENABLING CONDITIONS TABLE

System guard* ON
*System guard is ON when the following conditions set -
Throttle actuator ON
Throttle actuator duty calculation Executing
TP sensor Fail determined
Throttle actuator current-cut operation Not executing
Throttle actuator power supply 4 V or higher
Throttle actuator Fail determined