Typical Enabling Conditions
WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
All:
TYPICAL ENABLING CONDITIONS TABLE - ALL
| The monitor will run whenever these DTCs are not present | - |
Case 1:
TYPICAL ENABLING CONDITIONS TABLE - CASE 1
| Battery voltage | 8 V or more |
| Ignition switch | ON |
| Starter | OFF |
Case 2:
TYPICAL ENABLING CONDITIONS TABLE - CASE 2
| Either of following conditions is met | Condition 1 or 2 |
| 1. Air pump | Not operating |
| 2. Air switching valve | Not operating |
| Battery voltage | 8 V or more |
| Ignition switch | ON |
| Starter | OFF |
Case 3:
TYPICAL ENABLING CONDITIONS TABLE - CASE 3
| Air pump | Operating |
| Air switching valve | Operating |
| Battery voltage | 8 V or more |
| Ignition switch | ON |
| Starter | OFF |
Case 4:
TYPICAL ENABLING CONDITIONS TABLE - CASE 4
| Battery voltage | 8 V or more |
| Ignition switch | ON |
| Starter | OFF |