Typical Enabling Conditions
WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
All:
TYPICAL ENABLING CONDITIONS TABLE - ALL
| The monitor will run whenever these DTCs are not present | None |
Case 1:
TYPICAL ENABLING CONDITIONS TABLE - CASE 1
| Time after starter ON to OFF | 0.3 seconds or more |
| Number of camshaft position sensor signal pulse | 6 times |
| Battery voltage | 7 V or more |
| Ignition switch | ON |
Case 2:
TYPICAL ENABLING CONDITIONS TABLE - CASE 2
| Starter | OFF |
| Engine RPM | More than 450 rpm |
| Time after starter from ON to OFF | 3 seconds or more |