LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 934 (Engine Control System - Diagnostic Codes (1 Of 3)) >> DTC P0101: Mass Air Flow Circuit Range/Performance Problem >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

ALL: 

TYPICAL ENABLING CONDITIONS TABLE - ALL

Monitor will run whenever these DTCs are not present P0115 - P0118 (ECT sensor)
P0120 - P0223, P2135 (TP sensor)
P0125 (insufficient ECT for closed loop)
P0335 (CKP sensor)
P0340, P0341 (CMP sensor)

Mass air flow meter rationality (high voltage) 

TYPICAL MALFUNCTION THRESHOLDS TABLE - MASS AIR FLOW METER RATIONALITY (HIGH VOLTAGE)

Engine speed Less than 2,000 rpm
Engine coolant temperature 70°C (158°F) or more

Mass air flow meter rationality (low voltage) 

TYPICAL MALFUNCTION THRESHOLDS TABLE - MASS AIR FLOW METER RATIONALITY (LOW VOLTAGE)

Engine speed More than 300 rpm
Fuel cut OFF