LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 933 (Engine Control System - Diagnostic Codes (2 Of 3)) >> DTC P043E, P043F: Evaporative Emission System Leak Detection Reference Orifice Low Flow; Evaporative Emission System Reference Orifice High Flow >> Typical Malfunction Thresholds

Typical Malfunction Thresholds

WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

"Saturated" indicates that the EVAP pressure change is less than 0.1 kPa (0.75 mmHg) in 30 seconds.

TYPICAL MALFUNCTION THRESHOLDS TABLE

One of following conditions met -
FTP when just after reference pressure measurement started -1 kPa (755 mmHg) or higher
Reference pressure -4.85 kPa (726 mmHg) or lower
Reference pressure -1.05 kPa (754 mmHg) or higher
Reference pressure Not saturated within 60 seconds
Difference between first reference pressure and second reference pressure 0.7 kPa (5.25 mmHg)