Typical Enabling Conditions
WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL ENABLING CONDITIONS TABLE
| The monitor will run whenever these DTCs are not present | - |
| Engine speed | 1,500 rpm or less |
| Either A or B condition is met | - |
| A. Following conditions are met | (a) and (b) |
| (a) Engine speed | 500 rpm or less |
| (b) Battery voltage | 6 V or higher |
| B. Following conditions are met | (a), (b) and (c) |
| (a) Engine speed | Higher than 500 rpm |
| (b) Battery voltage | 10 V or higher |
| (c) Number of sparks after CPU is reset | 5 sparks or more |