LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Brakes - Abs) >> Downhill Assist Control Switch >> Installation

Downhill Assist Control Switch: Installation

WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL DOWNHILL ASSIST CONTROL SWITCH 
    1. Attach the 2 claws to install the switch.
      Fig 1: Installing Downhill Assist Control Switch
      G04489523Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
scientia non olet · About LEMON Manuals