LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 ((Door / Hatch)) >> Hood Support >> Removal

Hood Support: Removal

WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the same procedures for the RH side and LH side.

  1. REMOVE HOOD SUPPORT ASSEMBLY 
    1. Remove the bolt and hood support from the hood.

      HINT:

      While supporting the hood by hand, remove the hood support from the hood.

    2. Remove the bolt and hood support.