Front Door: Adjustment

WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

ADJUST FRONT DOOR PANEL SUB-ASSEMBLY
1. Using SST, loosen the body's hinge bolts and adjust the door's position.
  SST 09812-00010
2. Tighten the body's hinge bolts after the adjustment.
  Torque: 23 N*m (235 kgf*cm, 17 ft.*lbf)
  
  Fig 1: Loosening Body's Hinge Bolts & Adjusting Door's Position
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Loosen the door's hinge bolts and adjust the door's position.
4. Tighten the door's hinge bolts after the adjustment.
  Torque: 26 N*m (265 kgf*cm, 19 ft.*lbf)
  
  Fig 2: Loosening Door's Hinge Bolts & Adjusting Door's Position
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
ADJUST DOOR LOCK STRIKER
1. Check that the door fit and door lock linkages are adjusted correctly.
2. Loosen the striker mounting screws.
  Torque: 11 N*m (115 kgf*cm, 8 ft.*lbf)
3. Using a plastic-faced hammer, tap the striker to adjust it.
  
  Fig 3: Adjusting Striker
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002