LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Theft Deterrent) >> Theft Deterrent System >> Customize Parameters

Customize Parameters

WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE) 

    HINT:

    The following items can be customized.

    NOTE:
    • When the customer requests a change in a function, first make sure that customization of the function is possible.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.

Theft deterrent system: 

THEFT DETERRENT SYSTEM

Display (Item) Default Contents Setting
PASSIVE MODE (#) (Passive Mode) OFF PASSIVE MODE is a function set by theft deterrent system 30 seconds after having driver's door closed from opening condition by removing key from ignition key cylinder. In PASSIVE MODE, under condition that theft deterrent system is set and after opening one of doors. If following operations are not performed within 15 seconds, theft deterrent system will operate by judging the conditions as theft.
  • Press transmitter unlock button.
  • Insert key to door key cylinder on driver's or passenger's door and turn it to unlock side.
  • Insert key to ignition key cylinder and turn ignition switch ON.
  • Open trunk with transmitter
  • Open trunk with key
ON / OFF
WARNING (HORN) (#) (Warning (horn)) ON Function to make warning by horn and theft deterrent horn available ON / OFF
ENTRY DELAY (#) (Entry Delay Time) 14 s Change entry delay time (period before starting warning) by passive mode. 0 s / 14 s / 30 s
WARN BY GLS SEN (#) (Warning by Glass Breakage Sensor) ON Function to turn ON/OFF glass breakage sensor. This function is only effective for vehicle with glass break sensor ON / OFF
INTRUSION SEN (#) (Intrusion Sensor) ON Function to turn ON / OFF intrusion sensor. This function is only effective for vehicle with intrusion sensor ON / OFF