Engine Hood Courtesy Switch: Removal
WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL NOTE: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- REMOVE HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH)
- Remove the 2 bolts, nut and hood lock (engine hood courtesy switch).
- DISCONNECT HOOD LOCK CONTROL CABLE ASSEMBLY
- Remove the hood lock control cable from the hood lock.