Engine Hood Courtesy Switch: Inspection
WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH)
- Measure the resistance of the switch.
Standard resistance
HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH)
| Tester Connection |
Condition |
Specified Condition |
| 1 - 2 |
LOCK |
10 kΩ or higher |
| UNLOCK |
Below 1 Ω |
If the result is not as specified, replace the lock assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002