REAR NO. 1 SEAT ASSEMBLY (For LH Side): Removal

WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE REAR NO. 1 SEAT ASSEMBLY
1. Fold the seatback down.
2. Unlock the seat lock, and swing the whole seat up and forward.
3. Using a screwdriver, remove the seat leg covers.
  HINT:
  
  Tape the screwdriver tip before use.
4. Remove the 4 bolts and rear No. 1 seat.
  Torque: 37 N*m (380 kgf*cm, 27 ft.*lbf)