LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Seat) >> Front Seat Cushion Heater >> Inspection

Front Seat Cushion Heater: Inspection

WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT FRONT SEAT CUSHION HEATER 
    1. Check the front seat cushion heater continuity.
      1. Heat the thermostat with a light.
      2. Check the seat cushion heater continuity between the terminals as shown in Fig 1.

        OK: 

        FRONT SEAT CUSHION HEATER

        Tester Connection Condition Specified Condition
        1 - 4 Always Continuity
        2 - 3 25 to 35°C (77 to 95°F) Continuity
        2 - 3 35 to 45°C (95 to 113°F) No continuity

        If the continuity is not as specified, replace the seat cushion heater.

        Fig 1: Checking Front Seat Cushion Heater Continuity
        G04438976Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002