LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Seat) >> Front Seat Assembly >> Installation

Front Seat Assembly: Installation

WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FRONT SEAT ASSEMBLY 
    1. Install the seat and connect the connectors.
      NOTE:
      • When handling the airbag connector, take care not to damage the airbag wire harness.
      • Be careful not to damage the vehicle body.
    2. Install the 4 bolts.

      Torque: 42 N*m (430 kgf*cm, 31 ft.*lbf) 

  2. INSTALL SEAT TRACK OUTER COVER 
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
scientia non olet · About LEMON Manuals