Pump Attenuator: Disposal
WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- DISPOSE OF PUMP ATTENUATOR
- Place the pump attenuator in a vise and saw a hole between "A" and "B" using a saw to discharge the gas inside.
CAUTION:
- As the gas is contained a metal bellows saw up to the metal bellows.
- The gas discharging is colorless, odorless and harmless.
- Saw a hole while covering the saw with a cloth because chips may fly up.