Damaging Force Control Actuator: Inspection
WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT DAMPING FORCE CONTROL ACTUATOR
- Disconnect the damping force control actuator connector.
- Measure resistance between each terminal of damping force control actuator.
Standard resistance
TERMINAL CONDITIONTerminals No. Specified Condition Terminals 1 and 2 12.0 to 13.6 Ω Terminals 2 and 3 12.0 to 13.6 Ω Terminals 2 and 4 12.0 to 13.6 Ω Terminals 2 and 5 12.0 to 13.6 Ω