Damaging Force Control Actuator: Disposal
WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- DISPOSE OF GAS CAMBER
- Place the gas camber in a vise and saw a hole in the hatched area shown in Fig 1
using a saw to discharge the bas inside.CAUTION:
- The gas discharging is colorless, odorless and harmless.
- Saw a hole while covering the saw with a cloth because chips may fly up.
- Place the gas camber in a vise and saw a hole in the hatched area shown in Fig 1
using a saw to discharge the bas inside.