DTC C1782/82: Stop Light Switch Circuit: Description
WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
When the brake pedal is depressed, the stop light switch comes on and battery positive voltage is applied to terminal STP of the ECU. This signal is used by the ECU as one of the starting conditions for anti-dive control.
DTC DETECTION CONDITION TABLE
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1782/82 | Stop light switch signal does not change |
|