Rear Shock Absorber: Replacement

WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE REAR SHOCK ABSORBER BUSH
1. Using SST and a press, press out the bush.
  SST 09710-14013 (09710-00061), 09710-28012 (09710-07031), 09950-70010 (09951-07100)
  
  Fig 1: Pressing Out Bush Using SST & Press
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR SHOCK ABSORBER BUSH
1. Using SST and a press, press in a new bushing.
  SST 09710-14013 (09710-00061), 09710-28012 (09710-07031), 09950-70010 (09951-07100)
  
  Fig 2: Pressing In New Bushing Using SST & Press
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002