On-Vehicle Inspection
WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT IGNITION KEY ILLUMINATION
- Check operation of the ignition key illumination.
- Apply battery voltage to the ignition key illumination and check operation of the ignition key illumination.
OK
IGNITION KEY ILLUMINATIONMeasurement Condition Specified Condition Battery positive (+) -> Terminal 1
Battery negative (-) -> Terminal 2Ignition key illumination lights up If the result is not as specified, replace the key illumination.
- Apply battery voltage to the ignition key illumination and check operation of the ignition key illumination.
- Check operation of the ignition key illumination.