LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Lighting System) >> High Mounted Stop Light Assembly >> On-Vehicle Inspection

On-Vehicle Inspection

WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT HI-MOUNTED STOP LIGHT ASSEMBLY 
    1. Measure the continuity of the light.

      OK 

      HI-MOUNTED STOP LIGHT

      Tester Connection Specified Condition
      1 - 2 Continuity

      If the result is not as specified, replace the light assembly.

      Fig 1: Inspecting Hi-Mounted Stop Light Assembly
      G04438512Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002