On-Vehicle Inspection
WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT HAZARD WARNING SWITCH ASSEMBLY
- Measure the continuity of the switch.
OK
HAZARD WARNING SWITCH
| Tester Connection |
Switch Position |
Specified Condition |
| 3 - 5 |
Pushed |
Continuity |
| Not pushed |
No continuity |
If the result is not as specified, replace the switch assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002