LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Seat Belt) >> Seat Belt Warning System >> Terminals Of Ecu

Terminals Of Ecu

WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK MAIN BODY ECU 
    Fig 1: Identifying Main Body ECU Connector Terminals
    G04438372Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    MAIN BODY ECU CONNECTOR TERMINALS TABLE

    Symbols (Terminal No.) Wiring Color Condition Specified Condition
    BECU (11) - Body ground - - Body ground Always 11 to 14 V
    SIG (10) - Body ground - - Body ground Ignition switch ON 11 to 14 V
    GND1 (4) - Body ground - - Body ground Always Below 1 Ω
    GND2 (16) - Body ground - - Body ground Always Below 1 Ω
    DBKL (B7-13) - Body ground G - Body ground Driver seat buckle switch is on (seat belt is fastened) Below 1 V