Steering Knuckle: Disassembly

WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE STEERING KNUCKLE ARM
1. Remove the 2 bolts and steering knuckle arm.
REMOVE STEERING KNUCKLE OIL SEAL
1. Using a screwdriver and hammer, tap out the oil seal.
REMOVE STEERING KNUCKLE BUSH
1. Using a brass bar and hammer, tap out the bearing and bushing.
  
  Fig 1: Tapping Out Bearing & Bushing Using Brass Bar & Hammer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002