Inspection Procedure

WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

CHECK POSITION SENSOR POWER SOURCE CIRCUIT
1. Check the position sensor power source circuit (see DTC B2620 ECU POWER SOURCE CIRCUIT MALFUNCTION ).
NG: REPAIR OR REPLACE MALFUNCTION PART

OK: GO TO NEXT STEP
CHECK ACTUATOR POWER SOURCE CIRCUIT
1. See ACTUATOR POWER SOURCE CIRCUIT .
NG: REPAIR OR REPLACE MALFUNCTION PART

OK: GO TO NEXT STEP
CHECK TILT MOTOR CIRCUIT
1. See TILT MOTOR CIRCUIT .
NG: REPAIR OR REPLACE MALFUNCTION PART

OK: REPLACE TILT AND TELESCOPIC ECU