DTC B2610: Tilt Position Sensor or Tilt Motor Circuit Malfunction: Description

WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

The tilt motor is operated by the power source voltage supplied from the tilt and telescopic ECU and makes the steering column tilt upward and downward. The tilt position sensor (Hall IC) in the tilt motor detects the tilt angle of the steering column and outputs the signal to the CPU in response to that tilt.

Fig 1: Tilt Lock Position Operation Range

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT:

Limit positions can be confirmed on the screen of the intelligent tester.

DTC DETECTION CONDITION TABLE

DTC No.	DTC Detection Condition	Trouble Area
B2610	Within tilt motor operation range, motor deceleration is detected and motor stops.	Position sensor power source circuit Actuator power source circuit Tilt motor circuit Tilt and telescopic ECU