Inspection Procedure
WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM ACTIVE TEST BY INTELLIGENT TESTER (OPEN DOOR WARNING LIGHT)
- Connect the intelligent tester to the DLC3.
- Check that the open door warning light operates using ACTIVE TEST (see DATA LIST / ACTIVE TEST ).
OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN ON PROBLEM SYMPTOMS TABLE
NG: GO TO NEXT STEP
- CHECK COMBINATION METER CIRCUIT
NG: REPLACE COMBINATION METER ASSEMBLY
OK: GO TO NEXT STEP
- CHECK WIRE HARNESS (BODY ECU - COMBINATION METER ASSEMBLY)
NG: REPAIR OR REPLACE HARNESS AND CONNECTOR
OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN ON PROBLEM SYMPTOMS TABLE