Hydraulic Brake Booster: Disposal

WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

DISPOSAL METHOD OF ACCUMULATOR
1. Place the accumulator in a vise, cover it with a cloth.
2. Using a saw, then cut the accumulator body slowly.
  CAUTION: Do not cut at a place except a stretch.
3. When the outer body of the accumulator is cut, gas discharges.
  
  Fig 1: Identifying Cut Off Area
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002