Park/Neutral Position Switch: Adjustment

WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY
1. Loosen the park/neutral position switch bolt and move the shift lever to N.
2. Align the switch groove with the neutral basic line.
3. Hold the switch in position and tighten the bolt.
  Torque: 13 N*m (130 kgf*cm, 9 ft.*lbf)
4. After adjustment, perform the inspection (see INITIALIZATION ).
  
  Fig 1: Aligning Switch Groove With Neutral Basic Line
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002