Typical Enabling Conditions
WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
The following conditions are common to all conditions below: ON malfunction (A) and (B)
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever the following DTCs are not present. | None |
| Output speed sensor circuit | Not circuit malfunction |
| Vehicle speed sensor "A" circuit | Not circuit malfunction |
| Transfer neutral position switch | OFF |
ON malfunction (A)
TYPICAL ENABLING CONDITIONS
| Output speed (Transfer output speed) | 1,000 to 3,000 rpm |
ON malfunction (B)
TYPICAL ENABLING CONDITIONS
| Output speed (Transfer output speed) | 143 rpm or more |