LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Automatic Transmission - A750F) >> Automatic Transmission System >> DTC P2716: Pressure Control Solenoid "D" Electrical (Shift Solenoid Valve SLT) >> Description

DTC P2716: Pressure Control Solenoid "D" Electrical (Shift Solenoid Valve SLT): Description

WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P2714: PRESSURE CONTROL SOLENOID "D" PERFORMANCE (SHIFT SOLENOID VALVE SLT)  .

DTC DETECTION CONDITION AND TROUBLE AREA

DTC No. DTC Detection Condition Trouble Area
P2716 Open or short is detected in shift solenoid valve SLT circuit for 1 second or more while driving (1 trip detection logic)
  • Open or short in shift solenoid valve SLT circuit
  • Shift solenoid valve SLT
  • ECM
  1. Reference: Inspect using an oscilloscope. 

    Check the waveform of the ECM connector.

    Standard voltage: Refer to  Fig 1  . 

    ITEM AND CONTENT REFERENCE

    Item Content
    Tester Connection E6-13 (SLT+) - E6-12 (SLT-)
    Tool Setting 5 V/DIV., 1 msec./DIV.
    Condition Engine idle speed
    Fig 1: Voltage Waveform Graph
    G04436513Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002