Typical Malfunction Thresholds
WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
OFF malfunction: All of the following conditions are met: Conditions (A), (B) and (C)
2 detections are necessary per driving cycle: 1st detection; temporary flag ON
2nd detection; pending fault code ON
OFF malfunction (A)
TYPICAL MALFUNCTION THRESHOLDS
| Turbine speed/Output speed (NT/NO) | 0.93 to 1.07 |
OFF malfunction (B)
TYPICAL MALFUNCTION THRESHOLDS
| Turbine speed/Output speed (NT/NO) | Not change as follows 0.93 to 1.07, then 0.65 to 0.79 |
OFF malfunction (C)
TYPICAL MALFUNCTION THRESHOLDS
| Output record from ECM for 4th --> 5th upshifting | Recorded |
ON malfunction
2 detections are necessary per driving cycle: 1st detection; temporary flag ON
2nd detection; pending fault code ON
TYPICAL MALFUNCTION THRESHOLDS
| Turbine speed/Output speed x 1st gear ratio (NT - NO x 1st gear ratio) | 150 rpm or more |