Typical Malfunction Thresholds
WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
OFF malfunction: All of the following are met: Conditions (A), (B), (C) and (D)
2 detections are necessary per driving cycle: 1st detection; temporary flag ON
2nd detection; pending fault code ON
OFF malfunction (A) and (B)
TYPICAL MALFUNCTION THRESHOLDS
| Turbine speed/Output speed (NT/NO) | 3.30 to 7.50 |
OFF malfunction (C)
TYPICAL MALFUNCTION THRESHOLDS
| Turbine speed/Output speed (NT/NO) | 0.65 to 0.79 |
OFF malfunction (D)
TYPICAL MALFUNCTION THRESHOLDS
| Output record from ECM for 4th --> 5th upshifting | Recorded |
ON malfunction: Both of the following conditions are met: ON malfunction (A) or (B), and ON malfunction (C) or (D)
ON malfunction (A)
TYPICAL MALFUNCTION THRESHOLDS
| Turbine speed/Output speed (NT/NO) | 1.91 to 2.35 |
ON malfunction (B)
TYPICAL MALFUNCTION THRESHOLDS
| Turbine speed/Output speed (NT/NO) | 1.28 to 1.53 |
ON malfunction (C)
TYPICAL MALFUNCTION THRESHOLDS
| Turbine speed - Output speed x 4th gear ratio (NT - NO x 4th gear ratio) | 1,000 rpm or more |
ON malfunction (D)
TYPICAL MALFUNCTION THRESHOLDS
| Turbine speed - Output speed x 5th gear ratio (NT - NO x 5th gear ratio) | 1,000 rpm or more |