LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Audio/Visual) >> MULTI-DISPLAY (W/O Navigation System) >> Drive Monitor Malfunction >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT BATTERY 
    1. Measure the voltage of the battery.

      Standard voltage: 11 to 14 V 

    • NG: RECHARGE OR REPLACE BATTERY 
    • OK: GO TO NEXT STEP 
  2. CHECK WIRE HARNESS (MULTI-DISPLAY - COMBINATION METER) 
    • NG: REPAIR OR REPLACE HARNESS AND CONNECTOR 
    • OK: GO TO NEXT STEP 
  3. CHECK COMBINATION METER 
    1. Is the combination meter operating normally?