Vanity Light: Removal
WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- REMOVE VISOR ASSEMBLY
- Using a screwdriver, remove the caps.
HINT:
Tape the screwdriver tip before use.
- Remove the 4 screws, then disconnect the connectors.
- Remove the 2 visors.
- Using a screwdriver, remove the caps.