Tire Pressure Warning Valve And Transmitter: Disposal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

The tire pressure warning valve and transmitter is powered by a lithium battery. When disposing of the tire pressure warning valve and transmitter, remove the battery and dispose of it correctly.

DISPOSE OF TIRE PRESSURE WARNING VALVE AND TRANSMITTER
1. Use the tip of a screwdriver to pry off the back cover.
  
  Fig 1: Prying Off Back Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the battery and cut the 2 terminals which connect the battery and base board.
  HINT:
  
  The battery and base board covered with silicone resin are exposed.
  
  Fig 2: Identifying Lithium Battery And Terminal
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002