Tire Pressure Warning Ecu: Removal
WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Before removing the tire pressure warning ECU, read the registered transmitter ID of all wheels and write them down to use for re-registration of transmitter ID (See REGISTRATION
).
- REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (See REMOVAL )
- REMOVE TIRE PRESSURE WARNING ECU
- Disconnect the tire pressure warning ECU connector.
- Remove the screw and remove the tire pressure warning ECU.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002