LIGHT CONTROL RHEOSTAT (for Sedan): Removal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE INSTRUMENT PANEL BOX (See REMOVAL )
REMOVE LIGHT CONTROL RHEOSTAT
1. Disconnect the connector.
2. Disengage the 2 claws and remove the light control rheostat.
  
  Fig 1: Identifying Light Control Rheostat Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002