COMBINATION METER (for Hatchback): Reassembly

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL COMBINATION METER GLASS
1. Engage the 9 claws and install the combination meter glass.
  
  Fig 1: Identifying Combination Meter Glass Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CLOCK ASSEMBLY (w/ Tachometer)
1. Engage the 2 claws and install the clock assembly.
2. Connect the connector.
  
  Fig 2: Identifying Clock Assembly Claws (W/ Tachometer)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002