COMBINATION METER (for Hatchback): Disassembly

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE CLOCK ASSEMBLY (w/ Tachometer)
1. Remove the connector.
2. Disengage the 2 claws and remove the clock assembly.
  
  Fig 1: Identifying Clock Assembly Claws (W/ Tachometer)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE COMBINATION METER GLASS
1. Disengage the 9 claws and remove the combination meter glass.
  
  Fig 2: Identifying Combination Meter Glass Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002