On-Vehicle Inspection

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY (for Front Side)
1. Check the operation of the windshield washer motor and pump front side.
  1. Fill the washer jar with washer fluid.
    HINT:
    
    The operation should be performed with the windshield washer motor and pump installed on the washer jar.
  2. Connect the positive (+) battery lead to terminal 1 of the windshield washer motor and pump, and the negative (-) battery lead to terminal 2. Check that washer fluid flows from the washer jar.
    
    Fig 1: Identifying Windshield Washer Motor And Pump Assembly (For Front Side)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    
    Standard:
    
    Washer fluid flows from the washer jar.
    
    If the result is not as specified, replace the windshield washer motor and pump.
INSPECT REAR WASHER MOTOR AND PUMP ASSEMBLY (for Rear Side)
1. Check the operation of the windshield washer motor and pump rear side.
  1. Fill the washer jar with washer fluid.
    HINT:
    
    The operation should be performed with the windshield washer motor and pump installed onto the washer jar.
  2. Connect the positive (+) battery lead to terminal 1 of the windshield washer motor and pump, and the negative (-) battery lead to terminal 2. Check that washer fluid flows from the washer jar.
    
    Fig 2: Identifying Rear Washer Motor And Pump Assembly (For Rear Side)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    
    Standard:
    
    Washer fluid flows from the washer jar.
    
    If the result is not as specified, replace the rear washer motor and pump.