On-Vehicle Inspection

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT REAR WIPER MOTOR
1. Check the automatic stop position.
  1. Operate the rear wiper motor, then stop the operation.
  2. Check the automatic stop position when the rear wiper motor operation has stopped.
    Standard:
    
    Rear wiper arm stops in the position shown in the illustration.
    
    Fig 1: Identifying Mark For Blade Position
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002